“30” Series Sales Information Book!
The Same Information The Dealers Received!

The original books are very rare. J.R. Hobbs and Jack Cherry have only ever seen one complete book in good condition, and it was used to make this 130-page reproduction.
Originally published and distributed to dealers 50 years ago in 1958, it contains images, descriptions, and specifications of “30” Series Agricultural Tractors and optional equipment. The reproduction even includes the color foldout introduction, just like the original!

The originals were bound in a “loose-leaf” notebook with the intention that the book could be updated. This also became their downfall, as pages became lost over the decades. Distribution of them also may have been less than that of the similar “20” Series Dealer Information Book, as far more of them still exist than do the “30” Series Book. Another explanation is that some dealers didn’t take the time to insert the “30” Series Package into their notebooks, and discard or file away the “20” Series information. Consequently, the “30” Series Package, which arrived in a mailing and was held together with a paper band, was tucked in a desk drawer or filing cabinet and ultimately lost.

The reproduction is firmly bound into a rugged, soft-cover book. Contents are listed rather than tabbed, to eliminate the possibility of tab-page damage and to avoid difficulty in turning pages. Also, eliminating the tab pages helped to keep publishing costs in line. While the value of a good original is in the range of $1000 or more, Two-Cylinder Club Members can own the reproduction for just $20.00! This is quite possibly the Best Value and Most Important Single Item Ever Made Available for anyone owning or planning to own a John Deere “30” Series Two-Cylinder Tractor. The limited one-time-only production run is sure to make this reproduction a sought-after collectible in its own right in the years to come.They’re half sold out! Order yours, and another for a friend, today!

The books are in stock and ready for immediate shipment. This is a one-time-only publishing run; the printing plates have been destroyed! Order soon so you will be assured of getting a copy. And, at this bargain price, you may wish to order several additionals to serve as gifts for family and friends.

The contents of the 130-page book are as follows:

The Companion To The
“30” Series Sales Information Book
the “20” Series Book!

Even more Colorful and Informative than the “30” Series Book!
The same size and same impressive quality, but this book contains
“see-through” pages to let you “build” your own Custom Powr-Trol Hydraulic System!

That’s right… you can start with the basic rockshaft and then add a single remote cylinder; or dual remote cylinders; and a universal 3-Point Hitch! That, and the great information and easy-to-understand images throughout this wonderful book, will increase your knowledge of the “20” and “30” Series Tractors to a new level. When combined with the “30” Series Sales Information Book that was reproduced earlier this year (the only two such books made available to dealers in the late-1950s) you’ll have a real grasp on the later two-cylinder tractors — something not all John Deere enthusiasts will be able to say. Yes, it takes both of these books to complete the two-cylinder set, but they won’t be available to everybody. The “30” Series Book is approaching the “SOLD OUT” status, and the exact same number of “20” Series Books have been ordered. Like the “30” Series, after the one-time-only production run, the printing plates will be destroyed! To top it off, there is an 11-page list of equipment for use with John Deere Tractors. The implement is listed, a description given, and then appropriate tractor model(s) are listed. It even goes so far as to list the John Deere Factory at which the implement was manufactured! Never before has such information been laid out in this concise fashion, but here it all is in the “20” Series Sales Information Book.

Obviously, with the see-through pages, this book cost more to produce. Even so, it is available to Two-Cylinder Club Members for just $25.00 plus handling and shipping. (Non-member price is $40.00.)

Here’s what it contains…

• Full-color images and essential information and specifications on 32 pages, covering the “320”, “420”, “520”, “620”, “720”, and “820”.
  
• The “420” Wheel Tractors are explained (with photos and illustrations on ten pages) to a degree that will make you more knowledgeable than ever.
• The “420” Crawler is featured on 12 pages that fulfills what you need to know to really understand what these little powerhouses are all about.
• No less than 14 pages are devoted to the engine for the “520”, “620”, and “720”, including gas, LP-Gas, and Diesel.
• An exciting, 26-page section on Hydraulics will help to end the mysteries of “what” and “how.” While some may take issue with the description “exciting,” that’s just how it can be, with over 50 images plus the super-nifty “build-it-yourself” see-through pages.
• A 12-page “Miscellaneous” section on the Waterloo Tractors shows many of the features and options that set one tractor apart from another, and add to the rarity and value of an otherwise common model.
• The final section is the 11-page Working Equipment list described earlier; a must-have for the person interested in pairing an implement with a tractor.
• 130 pages in all. A wonderful, valuable, and useful reference for yourself, or the perfect gift for a friend, all at the very reasonable price of just $25.00.
  

Take A Look At Some Of The Pages!

	There are 32 pages of Tractor Descriptions, from the “320” through the “820”. Descriptions and color images appear on one side, while the specifications appear on the back side. There is no one book that contains more information on the entire “20” Series. After all, this was the book that John Deere sent to its dealers!
	A full 14 pages digs right into the Engines for the Waterloo Tractors while the Dubuque Tractors are covered in another section. For those unfamiliar, the “20” Series Engines were the final evolution of the Two-Cylinder Era, smashing performance and economy records. With the images and descriptions here, you’ll understand how and why.
	The Hydraulics Section contains the famous see-through “build-it-yourself” pages, shown here flipped to the Universal 3-Point Hitch. As can be seen in the photo, the original see-through pages have some wrinkles. Through the use of new technology and materials, this should not be a problem with the reproduction.

The original book is shown above. It is a full-sized 8-1/2"x11" book of the loose-leaf type, with an embossed leather-look paper-product cover and tab pages to separate subjects. The reproduction does not have tab pages, and it is quality softbound in the same manner as this magazine. The back side of each tractor page contains specifications for that tractor. The contents of the book are described on page 28.

Only $25.00 per copy!

Two-Cylinder Club
P.O. Box 430 • Grundy Center, IA 50638
1 888 782-2582 or 1 319 824-6060
www.two-cylinder.com • twocyl@iowatelecom.net
One low shipping price of $5.00 (48 states),
NO MATTER HOW MANY BOOKS ARE ORDERED!
If you are placing the order for a regional club or a group of people, it doesn’t matter if you’re ordering 50 books at one time; we will still ship the entire order for just $5.00 to locations in the 48 contiguous states.

About to go to press as this is being written, the books will be in stock and ready to ship in late November 2008. This will be a one-time-only publishing run, after which the printing plates will be destroyed! Order soon so you will be assured of getting a copy. And, at this bargain price, you may wish to order several additionals to serve as gifts for family and friends.

© 2008 Two-Cylinder^® Club